| PART |
Description |
Maker |
| AD53032 AD53032JSTP |
Silver Mica Capacitor; Capacitance:12pF; Capacitance Tolerance: /- 5%; Series:CD17; Voltage Rating:500VDC; Capacitor Dielectric Material:Mica; Termination:Radial Leaded; Lead Pitch:5.9mm; Leaded Process Compatible:Yes RoHS Compliant: Yes
High Performance Driver/Comparator Active Load on a Single Chip
DRIVER/COMPARATOR/LOAD: A Single Chip that Performs the Pin Electronics Functions of Driver, Comparator and Active Load in ATE VLSI and Memory Testers
|
Analog Devices, Inc.
AD[Analog Devices]
|
| TS391RILT TS391IQ2T |
Low-power single voltage comparator
|
STMicroelectronics
|
| TS391IYLT TS39107 |
Low power single voltage comparator
|
STMicroelectronics
|
| AZV331 AZV331KSTR-E1 AZV331KSTR-G1 AZV331KTR-E1 AZ |
SINGLE GENERAL PURPOSE LOW VOLTAGE COMPARATOR
|
Diodes Incorporated
|
| IS9-139ASRH-8 IS9-139ASRH-Q 5962F0151001QXC 5962F0 |
Single Event Radiation Hardened Quad Voltage Comparator
|
Intersil Corporation
|
| HA1631S03 HA1631S02LP |
COMPARATOR, 5000 uV OFFSET-MAX, 12 ns RESPONSE TIME, PDSO5
Single CMOS Comparator (Push Pull/Open Drain Output)
|
Renesas Electronics Corporation
|
| AD8468WBKSZ-RL AD8468WBKSZ-R7 |
Rail-to-Rail, Fast, Low Power 2.5 V to 5.5 V, Single-Supply TTL/CMOS Comparator
COMPARATOR, 10000 uV OFFSET-MAX, 50 ns RESPONSE TIME, PDSO6
|
Analog Devices
ANALOG DEVICES INC
|
| HS9-139RH/PROTO |
Radiation Hardened Quad Voltage Comparator QUAD COMPARATOR, 2000 uV OFFSET-MAX, CDFP14
|
Intersil, Corp.
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| AD53033 AD53033JSTP |
DRIVER/COMPARATOR: High Performance Driver/Comparator on a Single Chip
|
AD[Analog Devices]
Analog Devices, Inc.
|
| NJU7108 NJU7108F3 |
LOW POWER AND LOW OFFSET VOLTAGE SUPER SMALL-SIZED SINGLE C-MOS COMPARATOR
|
NJRC[New Japan Radio]
|
