| PART |
Description |
Maker |
| PS21205 |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Corporation
|
| PS21963-T09 PS21963-AT PS21963-CT |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| PS21963-ST09 |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| PS21352-N |
TRANSFER-MOLD TYPE INSULATED TYPE
|
MITSUBISHI[Mitsubishi Electric Semiconductor]
|
| PS21343-N |
TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| MN103SD0Q MN103SFD0R |
Transfer mode: Word transfer. Burst transfer. Intermittent transfer
|
Panasonic Semiconductor
|
| 5P6SMA 5P4SMA |
5A mold isolated SCR
From old datasheet system
P gate all Diffused mold type Thyristor granted 5 A on-state Average current, with rated Voltages up to 600V
|
NEC Electronics
NEC[NEC]
NEC Corp.
|
| FP7G100US60 |
Transfer Moded Type IGBT Module
Transfer Molded Type IGBT Module
|
Fairchild Semiconductor
|
| BCR20B BCR20E BCR20A BCR20C |
MEDIUM POWER USE A, B, C : NON-INSULATED TYPE, E : INSULATED TYPE, GLASS PASSIVATION TYPE
|
Mitsubishi Electric Semiconductor
|
| RPI-124 |
Sensors > Photointerrupters > Linear Phototransistor output
PHOTO INTERRUPTER, DOUBLE-LAYER MOLD TYPE
Photo interrupter/ double-layer mold type
|
Rohm
|
| NNCD5.1F NNCD5.6F NNCD6.2F NNCD6.8F NNCD4.3F NNCD4 |
ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODES DOUBLE TYPE, ANODE COMMON 3PIN MINI MOLD 静电放电二极管双噪音裁剪式，阳极通用3针迷你模
RES 309-OHM 0.5% 0.10W 25PPM THIN-FILM SMD-0805 TR-7-PA ROHS
ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODES DOUBLE TYPE / ANODE COMMON 3PIN MINI MOLD
ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODES DOUBLE TYPE ANODE COMMON 3PIN MINI MOLD
|
NEC, Corp.
NEC Corp.
NEC[NEC]
|
| 100C1287 |
DAICO Switches SPST, TRANSFER
PIN Diode Transfer Switch
|
DAICO[DAICO Industries, Inc.]
|
