| PART |
Description |
Maker |
| PS21963-EST09 PS21963-EST |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| PS21961-ST |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| PS21993-4 PS21993-4A PS21993-4C PS21993-4W |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| PS21313 |
TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| MN103SD0Q MN103SFD0R |
Transfer mode: Word transfer. Burst transfer. Intermittent transfer
|
Panasonic Semiconductor
|
| RPI-352 A5800742 |
Sensors > Photointerrupters > Linear Phototransistor output
Photointerrupter, double-layer mold type
From old datasheet system
Photointerrupter/ double-layer mold type
|
ROHM[Rohm]
Rohm CO.,LTD.
|
| PS11011 |
Application Specific Intelligent Power Module FLAT-BASE TYPE INSULATED PACKAGE
FLAT-BASE TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
POWEREX[Powerex Power Semiconductors]
|
| RPI-122 A5800739 RPI122 |
Photointerrupter/ double-layer mold type
PHOTOINTERRUPTER, DOUBLE-LAYER MOLD TYPE
From old datasheet system
|
Rohm CO.,LTD.
|
| 100C1287 |
DAICO Switches SPST, TRANSFER
PIN Diode Transfer Switch
|
DAICO[DAICO Industries, Inc.]
|
| SI-3241 SI-3241N SI-3121N SI-3001N SI-3051N SI-309 |
3-Terminal/ Full-Mold/ Low Dropout Voltage Dropper Type
3-Terminal, Full-Mold, Low Dropout Voltage Dropper Type 12 V FIXED POSITIVE LDO REGULATOR, 1 V DROPOUT, PSFM3
|
SANKEN[Sanken electric]
Sanken Electric Co.,Ltd.
Sanken Electric Co., Ltd.
|
| BCR20A BCR20E BCR20C |
MEDIUM POWER USE A/ B/ C : NON-INSULATED TYPE/ E : INSULATED TYPE/ GLASS PASSIVATION TYPE
MEDIUM POWER USE A, B, C : NON-INSULATED TYPE, E : INSULATED TYPE, GLASS PASSIVATION TYPE
|
Mitsubishi Electric Semiconductor
Mitsubishi Electric Corporation
|
