| PART |
Description |
Maker |
| HD74HC157 HD74HC158 |
Quad. 2-to-1-line Data Selectors/Multiplexers
These devices each consist of four 2-input digital multiplexers with common select and strobe inputs
|
Hitachi Semiconductor
|
| MC74HC157A MC74HC157AD MC74HC157ADR2 MC74HC157ADT |
Quad 2-Input Data Selectors/Multiplexers High-Performance Silicon-Gate CMOS
Data Selector/Multiplexer 2-Input Q
CAP ELECT 100UF 35V TK SMD
|
ONSEMI[ON Semiconductor]
|
| MC74HC158 MC74HC158D MC74HC158N MC54_74HC158A ON13 |
Quad 2-Input Data Selector/Multiplexer
QUAD 2-INPUT DATA SELECTORS/MULTLPTEXERS
From old datasheet system
|
Motorola, Inc
ON Semi
|
| MC74HC153D MC74HC153N MC74HC153 ON1355 |
From old datasheet system
DUAL 4-INPUT DATA SELECTOR/MULTLPLEXER
Dual 4-Input Data Selector/Multiplexer
|
MOTOROLA[Motorola, Inc]
ON Semi
|
| PIC24FJ256GA106 PIC24FJ256GA110 PIC24FJ256GA11010 |
64/80/100-Pin, 16-Bit, General Purpose Flash Microcontrollers with Peripheral Pin Select
PIC24FJ256GA110 Family Data Sheet
|
Microchip Technology
|
| SLG59H1010V |
A 13.3 mΩ, 5 A, Integrated Power Switch with 12V/24V Input Lockout Select and MOSFET Current Monitor Output
|
Dialog Semiconductor
|
| SLG59H1013V |
A 13.3 mΩ, 3.5 A, 125°C-Rated, Integrated Power Switch with 12V/24V Input Lockout Select and MOSFET Current Monitor Output
|
Dialog Semiconductor
|
| MC145146-2 MC145146P2 MC145146DW2 |
4 BIT DATA BUS INPUT BUS INPUT PLL FREQUENCY SYNTHESIZER PLL FREQUENCY SYNTHESIZER, 22 MHz, PDSO20
4-Bit Data Bus Input PLL Frequency Synthesizer
|
Motorola Mobility Holdings, Inc.
Motorola, Inc
|
| MP7643AS |
4-Channel, Programmable Gain Voltage Output, 15 MHz Input Bandwidth 8-Bit DACs with Multiplying Parallel Digital Data Port PARALLEL, 8 BITS INPUT LOADING, 0.15 us SETTLING TIME, 8-BIT DAC, PDSO28
|
Exar, Corp.
|
| MCP6142 MCP6144 MCP6143 MCP6141 MCP6142-I/MS MCP61 |
600 nA, Non-Unity Gain Rail-to-Rail Input/Output Op Amps
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
|
Microchip Technology Inc.
MICROCHIP[Microchip Technology]
|
