| PART |
Description |
Maker |
| IMP1233D IMP1810 IMP1811 IMP1812 IMP1815 IMP1816 I |
4.125V power reset
RELAY 024VDC 01A DPDT-XX FORM:2C UC
Bi-Lobe Standard Metal Shell Nano Offset Connector
Low Power 5V/3.0V P Reset
Low Power/ 5V/ P Reset
Low Power, 5V, 楼矛P Reset
Low Power 5V P Reset
Low Power, 5V, P Reset
Low Power, 5V, μP Reset
4.375V power reset
|
IMP INC.
IMP Inc
IMP[IMP, Inc]
IMP[IMP Inc]
|
| MM1095BF MM1095 MM1095AD MM1095AF MM1095AS MM1095B |
System Reset (with built-in watchdog timer)
System Reset (Built-in Watch Dog Timer)
|
http://
Mitsumi Electronics, Corp.
MITSUMI ELECTRIC
|
| MAX801 MAX801CPA MAX801CSA MAX801EPA MAX801ESA MAX |
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.425V. Watchdog.
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.675V. Watchdog.
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.575V. CMOS RAM write protection..
8-Pin µP Supervisory Circuits with ±1.5% Reset Accuracy
8-Pin µP Supervisory Circuits with ±1.5% Reset Accuracy
8-Pin μP Supervisory Circuits with ±1.5eset Accuracy
8-Pin P Supervisory Circuits with 1.5eset Accuracy
From old datasheet system
8-Pin レP Supervisory Circuits with 【1.5eset Accuracy
5015 RR 3#8 SKT RECP
8-Pin レP Supervisory Circuits with 1.5eset Accuracy 8引脚レP监控电路与精度1.5eset
8-Pin レP Supervisory Circuits with 1.5eset Accuracy 8引脚微处理器监控电路，提amp;plusmn;1.5%的复位门限精
Interface IC 1-CHANNEL POWER SUPPLY SUPPORT CKT, CDIP8
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.575V. Watchdog.
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.675V. CMOS RAM write protection..
|
MAXIM - Dallas Semiconductor
MAXIM[Maxim Integrated Products]
Maxim Integrated Products, Inc.
|
| S24022SBT S24023SBT S24023P2.7T |
Precision RESET controller and 2K I2C memory with both RESET and non-RESET outputs
|
SUMMIT Microelectronics
|
| SA56616-XX SA56615-XX SA56615-XX_SA56616-XX_1 |
CMOS system reset with adjustable delay time
From old datasheet system
|
Philips
|
| 2SB705A 2SB705 2SB705B 2SD745 2SD745A 2SD745B 2SD7 |
4-Pin, Ultra Low-Voltage, Low-Power µP Reset Circuits with Manual Reset 晶体管|晶体管|进步党| 20V的五（巴西）总裁| 700mA的一（c）|2
PNP/NPN SILICON TRIPLE DIFFUSED TRANSISTOR 进步 NPN硅三重扩散晶体管
TRANSISTOR | BJT | PNP | 20V V(BR)CEO | 700MA I(C) | TO-92
Low-Power, Single-/Dual-Level Battery Monitors with Hysteresis and Integrated µP Reset
From old datasheet system
|
Unknow
Sanyo Electric Co., Ltd.
Electronic Theatre Controls, Inc.
List of Unclassifed Manufacturers
ETC[ETC]
|
| MM1142 |
System Reset (with built-in watchdog timer)
From old datasheet system
|
MITSUMI ELECTRIC
|
| M62023P M62023L M62023FP M62023E M62023 |
From old datasheet system
SYSTEM RESET IC WITH SWITCH FOR MEMORY BACK-UP
|
Mitsubishi Electric Sem...
MITSUBISHI[Mitsubishi Electric Semiconductor]
Mitsubishi Electric Corporation
|
| AP163702 |
Reset and System Startup Configuration via PORT0
From old datasheet system
|
Infineon
|
| MCP809 MCP809T-270I_TT MCP809T-300I_TT MCP809T-315 |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
MICROCONTROLLER SUPERVISORY CIRCUIT WITH PUSH-PULL OUTPUT
|
Microchip Technology Inc.
|
| 3602-12-72 3650-12-52 3650-05-92 3660-05-92 3660-1 |
Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset
300mA LDO Linear Regulators with Internal Microprocessor Reset Circuit
|
Bivar, Inc.
Pomona Electronics
Xicon Passive Components
|
| TC1275 TC1275-20ENBTR TC1275-10ENBTR TC1275-5ENBTR |
(TC1275 / TC1276 / TC1277) 3-Pin Reset Monitors for 3.3V Systems
The TC1275, TC1276 and TC1277 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide ...
The TC1275, TC1276 and TC1277 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output i
|
Microchip Technology Inc.
|
