impedances pdf Datasheet P9 Full Text Search --- IC-ON-LINE

impedances Datasheet PDF File

For impedances Found Datasheets File :: 5171 Search Time::1.922ms
Page :: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | <9> | 10 | 11 | 12 | 13 | 14 | 15 |

				ZARLINK[Zarlink Semiconductor Inc]
Part No.	ZL40810 ZL40810DCE ZL40810DCF
OCR Text	...s assume 50 Ohm source and load impedances Typical input sensitivity (sinewave drive) @ +25 Deg C 20.00 10.00 Vin into 50 Ohm (dBm) 0.00 GUARANTEED OPERATING WINDOW -10.00 25C MAX (Typ) -20.00 Input frequency extend...
Description	10-GHz Fixed Modulus ÷ 8 10-GHz Fixed Modulus 8 10-GHz Fixed Modulus ± 8
File Size	529.36K / 13 Page	View it Online	Download Datasheet

				ZARLINK[Zarlink Semiconductor Inc]
Part No.	ZL4081 ZL40813 ZL40813DCE ZL40814 ZL40814DCE ZL40818 ZL40818DCE
OCR Text	...s assume 50 Ohm source and load impedances. The device characterisation test method incremented the amplitude over the entire range of frequency and ensures that there are no "holes" in the characteristic. For details of the test set-up...
Description	13.5GHz Fixed Modulus divide 16 Prescaler 13.5GHz Fixed Modulus Dividers
File Size	332.09K / 15 Page	View it Online	Download Datasheet

				SANYO[Sanyo Semicon Device]
Part No.	LC72321
OCR Text	...rts Since the output transistor impedances are unbalanced CMOS, these pins can be effectively used for functions such as key scan timing. These pins go to the output high impedance state in BACKUP mode. These pins go to the low level during...
Description	Single-Chip Microcontroller with PLL and LCD Driver
File Size	232.43K / 13 Page	View it Online	Download Datasheet

				SANYO[Sanyo Semicon Device]
Part No.	LC72322R LC72323R
OCR Text	...rts Since the output transistor impedances are unbalanced CMOS, these pins can be effectively used for functions such as key scan timing. These pins go to the output highimpedance state in BACKUP mode. These pins go to the low level during ...
Description	Single-Chip PLL and Microcontroller with PLL and LCD Driver Single-Chip Microcontroller with PLL and LCD Driver CMOS LSI
File Size	203.42K / 13 Page	View it Online	Download Datasheet

				Sanyo Semicon Device
Part No.	LC72323
OCR Text	...rts Since the output transistor impedances are unbalanced CMOS, these pins can be effectively used for functions such as key scan timing. These pins go to the output highimpedance state in BACKUP mode. These pins go to the low level during ...
Description	Single-Chip Microcontroller with PLL and LCD Driver
File Size	221.69K / 13 Page	View it Online	Download Datasheet

				Mitsubishi Electric, Corp. MITSUBISHI[Mitsubishi Electric Semiconductor]
Part No.	MA1100-1
OCR Text	...8 x 40 mm3 s50 Ohm Input/Output impedances 3 mm 71 mm MA1100-1 77 mm 4 HOLES 3.5 mm Vg(-6V:PIN#12) GND(PIN#11) Vdet(PIN#13) (out) APPLICATION sDCS 1800 (1805 ~ 1880 MHz) Base station 40 mm 25 PINs D-SUB 10 mm RF IN Vd(+...
Description	For DCS1800 - 30W Power Amplifier 对于DCS1800 30W功率功放 From old datasheet system
File Size	22.27K / 1 Page	View it Online	Download Datasheet

				Maxim Integrated Products, Inc. MAXIM[Maxim Integrated Products]
Part No.	MAX442 MAX442CPA MAX442CSA MAX442EPA MAX442ESA MAX442C_D MAX442C/D
OCR Text	...the amplifier, even with source impedances as great as 250--a significant improvement over common mux or switch alternatives. Feedback resistors should be limited to no more than 500 to ensure that the RC time constant formed by the resisto...
Description	140MHz, 2-Channel Video Multiplexer/Amplifier
File Size	92.34K / 8 Page	View it Online	Download Datasheet

				MOTOROLA[Motorola, Inc]
Part No.	MC34115DW MC34115P MC34115
OCR Text	... of 2.5 A max, thus the driving impedances of Pins 1 and 2 should be equal to avoid disturbing the idle channel characteristics of the encoder. Pin 3 - Syllabic Filter This is the point at which the syllabic filter voltage is returned to th...
Description	CONTINUOUSLY VARIABLE SLOPE DELTA MODULATOR/DEMODULATOR
File Size	359.53K / 16 Page	View it Online	Download Datasheet

				MICREL[Micrel Semiconductor]
Part No.	MIC5014-1 MIC5014BM MIC5014BN MIC5015BM MIC5015BN
OCR Text	...015 have relatively high output impedances, a normal oscilloscope probe will load the device. This is especially pronounced at low voltage operation. It is recommended that a FET probe or unity gain buffer be used for all testing. Applic...
Description	Low-Cost High- or Low-Side MOSFET Driver Final Information
File Size	75.08K / 12 Page	View it Online	Download Datasheet

For impedances Found Datasheets File :: 5171 Search Time::1.922ms
Page :: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | <9> | 10 | 11 | 12 | 13 | 14 | 15 |