| |
|
 |
MAXIM - Dallas Semiconductor
|
| Part No. |
DS2156DK DS2155DK
|
| OCR Text |
...I bus connection is provided by header J1 (Tx) and header J2 (Rx). After configuring the following registers toggle the MSTREG.URST bit to reset the UTOPIA II core. UTOPIA II Setup, Register Settings for daughter card CPLD
NAME SWITCH 1 SW... |
| Description |
T1/E1/J1 Single-Chip Transceiver Design Kit Daughter Cards
|
| File Size |
1,094.75K /
21 Page |
 View
it Online |
Download Datasheet
|
| |
|
|
MAXIM - Dallas Semiconductor
|
| Part No. |
MAX110EVKIT
|
| OCR Text |
...together by aligning the 40-pin header of the MAX110 EV kit with the 40pin connector of the 80C32 module. Gently press them together. The tw...socket for U3 16-pin socket for U1 4.5" x 3" PC board Rubber feet
_______________________________... |
| Description |
Evaluation Kit for the MAX110/MAX111
Evaluation Kit for the MAX110/ MAX111
|
| File Size |
327.28K /
20 Page |
View
it Online |
Download Datasheet |
| |
|
|
Maxim
|
| Part No. |
MAX1407EVSYS MAX1407EVKIT
|
| OCR Text |
...e boards by aligning the 40-pin header of the MAX1407 EV kit with the 40-pin connector of the 80C32MODULE-DIP module. Gently press them toge...socket. 3) Remove the rev 2.0 ROM from its antistatic packaging. 4) Align the rev 2.0 ROM in the U3 ... |
| Description |
Evaluation Kit for the MAX1407/MAX1408/MAX1409/MAX1414
|
| File Size |
1,348.68K /
20 Page |
View
it Online |
Download Datasheet |
| |
|
|
Maxim
|
| Part No. |
MAX1499EVKIT
|
| OCR Text |
...e boards by aligning the 40-pin header of the MAX1499 EV kit with the 40-pin connector of the 68HC16MODULE-DIP module. Gently press them together. The two boards should be flush against one another. 3) Connect a +7VDC to +20VDC power source... |
| Description |
Evaluation Kit/Evaluation System for the MAX1499
|
| File Size |
363.20K /
24 Page |
View
it Online |
Download Datasheet |
| |
|
|
MAXIM - Dallas Semiconductor
|
| Part No. |
MAX6660EVSYS MAX6660EVKIT
|
| OCR Text |
... MAX6660 EV kit with the 20-pin header of the MAXSMBUS interface board. Gently press them together. 2) Make sure switch S1 on the MAX6660 EV kit is in the OFF position. 3) Make sure JU3 is set to the 1-2 position. 4) Connect a fan to either... |
| Description |
Evaluation System/Evaluation Kit for the MAX6660
|
| File Size |
186.36K /
7 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|
