| |
|
 |
TE Connectivity Ltd
|
| Part No. |
3-1579005-0 3-1579005-1 1-0519151-3
|
| OCR Text |
...hamfers facing the front of the stationary jaws. 3. insert a die retention screw (m4x25) through the jaw and die and tighten the screw so that the die is held in place, but do not tighten the screw completely at this point. 4. place the low... |
| Description |
For further information, not included in this IS , and for technical assistance please contact
|
| File Size |
125.32K /
11 Page |
 View
it Online |
Download Datasheet
|
| |
|
|
Keysight Technologies
|
| Part No. |
N7609B
|
| OCR Text |
... C support static scenarios for stationary receivers or dynamic scenarios for moving receivers C control satellite visibility, power, multipath, and pseudorange error in real time C create waveform fles that simulate single or multi-sat... |
| Description |
Signal Studio for Global Navigation
|
| File Size |
1,938.21K /
13 Page |
View
it Online |
Download Datasheet |
| |
|
|
TE Connectivity Ltd
|
| Part No. |
1490352-7 1490352-6 1490352-2
|
| OCR Text |
...to the wire size stamped on the stationary die. 2. center the terminal or splice in the stationary die as shown in figure 4. 3. activate the power unit so that the moving die advances and holds the terminal or splice in place without deform... |
| Description |
Crimping Die Assemblies
|
| File Size |
217.33K /
6 Page |
View
it Online |
Download Datasheet |
| |
|
|
TE Connectivity Ltd
|
| Part No. |
24088-7 314077-1 314077-2
|
| OCR Text |
stationary die die holding screws moving die locator / insulation stop wire range marking ? 2011 tyco electronics corporation, a te connectivity ltd. company ? all rights reserved *trademark te connectivity, te connectivit y (logo), and ... |
| Description |
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
|
| File Size |
149.70K /
4 Page |
View
it Online |
Download Datasheet |
| |
|
|
TE Connectivity Ltd
|
| Part No. |
408-9887
|
| OCR Text |
...ly front of tool (locator side) stationary jaw back of tool (wire side) pivot pin pro--crimper iii hand crimping tool frame 354940--1 (408--9930) stationary handle moving handle the pro--crimper iii hand crimping tool is a ?commercial? grad... |
| Description |
PRO-CRIMPER III Hand Crimping
|
| File Size |
239.01K /
6 Page |
View
it Online |
Download Datasheet |
| |
|
|
TE Connectivity Ltd
|
| Part No. |
411-18229 9-744002-8
|
| OCR Text |
...hamfers facing the front of the stationary jaws. 3. insert a die retention screw (m4x25) through the jaw and die and tighten the screw so that the die is held in place, but do not tighten the screw completely at this point. 4. place the low... |
| Description |
For further information, not included in this IS , and fortechnical assistance please contact
|
| File Size |
93.34K /
11 Page |
View
it Online |
Download Datasheet |
| |
|
|
TE Connectivity Ltd
|
| Part No. |
2-306131-2 4-520447-2
|
| OCR Text |
....94 [.313 ] note: not to scale. stationary die (anvil) note: use wire with stranded conductors only. 224027--1 224027--2 ~ terminal loaded this side moving die (indenter) 1. introduction this instruction sheet covers the use of crimping die... |
| Description |
Tooling Assemblies
|
| File Size |
100.63K /
4 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|
