| |
|
 |
Supertex Inc
SUTEX[Supertex, Inc]
Supertex Inc
|
| Part No. |
HV574X HV574 HV574PG
|
| OCR Text |
...w Data set-up time before clock rises Data hold time after clock rises Time from latch enable to HVOUT Delay time clock to data high to low Delay time clock to data low to high Delay time clock to LE low to high Width of LE pulse LE set-up ... |
| Description |
100 MHz/ 80-Channel Serial To Parallel Converter With Push-Pull Outputs
100 MHz, 80-Channel Serial To Parallel Converter With Push-Pull Outputs
|
| File Size |
448.78K /
5 Page |
 View
it Online |
Download Datasheet
|
| |
|
|
Fuji
|
| Part No. |
FA5304
|
| OCR Text |
...Accordingly, the CS pin voltage rises as shown in Figure 6. The CS pin is connected to an input of the PWM comparator. The device is in soft-start mode while the CS pin voltage is between 1.0V and 1.9V common to FA5304A and FA5305A. During ... |
| Description |
Analog IC
|
| File Size |
280.31K /
17 Page |
View
it Online |
Download Datasheet |
| |
|
|
PHILIPS[Philips Semiconductors]
|
| Part No. |
PUCC3801 PUCC3801T PUCC3801P
|
| OCR Text |
...up current below 70 A until VDD rises above 10 V.
9397 750 08419 (c) Koninklijke Philips Electronics N.V. 2001. All rights reserved.
Product data
Rev. 01 -- 10 September 2001
4 of 16
Philips Semiconductors
PUCC3801
Current-... |
| Description |
Current-mode PWM controller
|
| File Size |
90.19K /
16 Page |
View
it Online |
Download Datasheet |
| |
|
|
MOTOROLA INC
ON Semi
|
| Part No. |
MAX809_D ON0397 MAX809MTR MAX810RTR MAX809JTR
|
| OCR Text |
... a minimum of 140msec after VCC rises above the reset threshold. The MAX810 has an active-high RESET output while the MAX809 has an active-low RESET output. The output of the MAX809 is guaranteed valid down to VCC = 1V. Both devices are ava... |
| Description |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
From old datasheet system
ORDERING INFORMATION
|
| File Size |
125.56K /
8 Page |
View
it Online |
Download Datasheet |
| |
|
|
MPS[Monolithic Power Systems]
|
| Part No. |
MP2106DQ EV2106DQ_DK-00A MP2106 MP2106DK EV2106DQ/DK-00A
|
| OCR Text |
...r at startup. As the SS voltage rises, the feedback threshold voltage increases to limit inrush current during startup. Feedback Input. FB is the inverting input of the internal error amplifier. Connect a resistive FB voltage divider from t... |
| Description |
1.5A, 15V, 800KHz Synchronous Buck Converter
|
| File Size |
284.06K /
11 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|
