Part Number Hot Search : 
ON0711 NJM2063 50220 0172D BYP60A6 MPC74 KF930 ISL6277A
Product Description
Full Text Search
  8mv Datasheet PDF File

For 8mv Found Datasheets File :: 410    Search Time::2.375ms    
Page :: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | <13> | 14 | 15 |   

    UTC[Unisonic Technologies]
Part No. UTCA9849
OCR Text ...stics of the power save pin is -8mv / C, and the resistance will fluctuate between 30% so be careful of the input voltage range. (2) Hall input The input circuit shown in Fig.4 is used for the Hall inputs. The Hall elements can be connected...
Description 3-phase motor driver for CD-ROMs

File Size 145.12K  /  11 Page

View it Online

Download Datasheet





    MSK590XHRH MSK590XRH MSK590XRHG MSK590XERH MSK590XKRH MSK5901 MSK590XERHG MSK590XHRHG MSK590XKRHG

M.S. Kennedy Corporatio...
MSK[M.S. Kennedy Corporation]
Part No. MSK590XHRH MSK590XRH MSK590XRHG MSK590XERH MSK590XKRH MSK5901 MSK590XERHG MSK590XHRHG MSK590XKRHG
OCR Text ... this would result in a drop of 8mv/ft at 1Amp of load current. It is also important to follow the capacitor selection guidelines to achieve best performance. +CCOMP CAPACITOR: For improved ripple rejection, +Ccomp can be bypassed to gro...
Description    DUAL RAD TOLERANT /- VOLTAGE REGULATOR

File Size 261.37K  /  6 Page

View it Online

Download Datasheet

    AD
Part No. AD535JH
OCR Text ...tenng 10Hz to 10kHz 4.5mV rms 1.8mv rms 0.9mV rms 0.09mV rms = +X (VOUT = +lOV) and Finally, readjust Zo for the best X 0.2V O.5V IV 10V compromise at Z = +X, Z = -X and Z = O. The remaining error (Figure 13) consists p...
Description Internally Trimmed Integrated Circuit Divider

File Size 2,020.29K  /  6 Page

View it Online

Download Datasheet

    KOM-1020

KODENSHI KOREA CORP.
Part No. KOM-1020
OCR Text ...Topr Characteristics 4.5 ~ 5.5V 8mv TYP 70 MHz TYP 5.0 ns MAX 150 ms MAX 100 us -20 ~+70 - [Ta = 25 Condition ] -3dB Point for 1MHz Modulated Signal Time(rise time, fall time) for a 1Vp-p Pulse During Power Up During Power Up - ...
Description Power Monitor IC

File Size 232.28K  /  1 Page

View it Online

Download Datasheet

    KOM-1021

KODENSHI KOREA CORP.
Part No. KOM-1021
OCR Text ...Topr Characteristics 4.5 ~ 5.5V 8mv MIN 100 MHz TYP 3.5 ns MAX 150 ms MAX 100 us 0 ~+70 - [Ta = 25 ] Condition -3dB point for 1MHz Modulated Signal Time(rise time, fall time) for a 1Vp-p Pulse During Power Up During Power Up - ...
Description Power Monitor IC

File Size 231.19K  /  1 Page

View it Online

Download Datasheet

    KOM-5121

KODENSHI KOREA CORP.
Part No. KOM-5121
OCR Text ... Characteristics 4.5 ~ 5.5V 8mv MIN 100 MHz Typ 3.5 ns Max 150 ms Max 100 us -20 ~+75 Condition -3dB Point for 1Mhz Modulated Signal Time(rise time, fall time) for a 1Vp-p pulse During Power Up During Power Up - 1/1
Description Power Monitor IC

File Size 224.79K  /  1 Page

View it Online

Download Datasheet

    Linear Technology, Corp.
Part No. 1671F LT1671IS8TRPBF
OCR Text ...Overdrive Low Offset Voltage: 0.8mv Operates Off Single 5V or Dual 5V Supplies Input Common Mode Extends to Negative Supply No Minimum Input Slew Rate Requirement Complementary TTL Outputs Inputs Can Exceed Supplies without Phase Reversal P...
Description 60ns, Low Power,Single Supply, Ground-Sensing Comparator; Package: SO; No of Pins: 8; Temperature Range: -40&deg;C to 85&deg;C COMPARATOR, 4000 uV OFFSET-MAX, 85 ns RESPONSE TIME, PDSO8
From old datasheet system

File Size 158.42K  /  12 Page

View it Online

Download Datasheet

    1797F LT1797IS5 LT1797CS5

Linear Technology
Part No. 1797F LT1797IS5 LT1797CS5
OCR Text ...swing to within 50mV of V + and 8mv of V - without drawing excess current in either condition. The amplifier can drive loads up to 25mA and still maintain rail-to-rail capability. The LT1797 op amp is available in the space saving 5-lead SO...
Description 10MHz, Rail-to-Rail Input and Output Op Amp in SOT-23
From old datasheet system

File Size 191.29K  /  12 Page

View it Online

Download Datasheet

    MAXIM - Dallas Semiconductor
Part No. MAX1813EVKIT
OCR Text ...nsition the output voltage at 8.8mv/s. Alter the speed of the transition by changing resistor R14 (51.1k). Longer-than-expected transitions maybe observed due to switch bounce (SW1). To eliminate switch bounce, set SW1-D (SUS) to the OFF po...
Description Evaluation Kit for the MAX1813
From old datasheet system

File Size 366.80K  /  11 Page

View it Online

Download Datasheet

For 8mv Found Datasheets File :: 410    Search Time::2.375ms    
Page :: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | <13> | 14 | 15 |   

▲Up To Search▲

 




Price and Availability




 
Price & Availability of 8mv

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X
0.50309300422668