| |
|
 |
MAXIM - Dallas Semiconductor
DALLAS[Dallas Semiconducotr]
DALLAS[Dallas Semiconductor]
|
| Part No. |
DS1085 DS1085Z-10 DS1085Z-50 DS1085Z-25
|
| OCR Text |
... disable the master oscillator, putting the device into a low-power mode for power-sensitive applications.
Figure 1. DS1085 BLOCK DIAGRAM
0M0
0M1
1M0
1M1
OVERVIEW
A block diagram of the DS1085 is shown in Figure 1. The DS... |
| Description |
EconOscillator Frequency Synthesizer
|
| File Size |
328.53K /
21 Page |
 View
it Online |
Download Datasheet
|
| |
|
|
Maxim Integrated Products, Inc.
DALLAS
|
| Part No. |
DS1821S
|
| OCR Text |
...e cycled. Note that temporarily putting the DS1821 into 1-wire mode does not change the power-up mode of the device; this can only be changed by rewriting the T/R bit in the status/configuration register. Also note that holding both VDD an... |
| Description |
(461.21 k) 61.21十一
Programmable Digital Thermostat
|
| File Size |
459.57K /
17 Page |
View
it Online |
Download Datasheet |
| |
|
|
Zarlink
|
| Part No. |
MT9046
|
| OCR Text |
...izes the JTAG TAP controller by putting it in the Test-Logic-Reset state. If not used, this pin should be held low. Test Clock (Input): Provides the clock to the JTAG test logic. This pin is internally pulled up to VDD. Test Mode Select (In... |
| Description |
T1/E1 System Synchronizer with Holdover
|
| File Size |
430.33K /
34 Page |
View
it Online |
Download Datasheet |
| |
|
|
Mitsubishi Electric & Electronics USA
|
| Part No. |
PS21865
|
| OCR Text |
...ulse width should be decided by putting external capacitor between CFO and VNC terminals. (Example : CFO=22nF tFO=1.8ms (Typ.)) High voltage (600V or more) and fast recovery type (less than 100ns) diodes should be used in the bootstrap cir... |
| Description |
TRANSISTOR,IGBT POWER MODULE,COMPLEX BRIDGE,600V V(BR)CES,20A I(C)
|
| File Size |
118.29K /
9 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|
